GT-R Register - Nissan Skyline and GT-R Drivers Club forum

GT-R Register - Nissan Skyline and GT-R Drivers Club forum (https://www.gtr.co.uk/forum/)
-   General Nissan R35 GT-R Chat (https://www.gtr.co.uk/forum/general-nissan-r35-gt-r-chat.html)
-   -   Show us your intakes??? (https://www.gtr.co.uk/forum/164461-show-us-your-intakes.html)

Ja5on 4th May 2012 05:19 PM

Show us your intakes???
 
How's running with what intakes and what stage tune are you running? Is there a noticeable intake sound increase?

GTC, Litchfield, Stock, other?

Pictures please if you any?

Thanks in advance.

barry P. 4th May 2012 05:56 PM

Collecting my new intakes from Litchfield on Sun, Iain should be bringing a set of Forge ones down to Robbie's BBQ.

Ja5on 4th May 2012 05:58 PM

:-) be nice to see, he said they had a matte black option available on his

barry P. 4th May 2012 06:02 PM

They are not the cheapest but Matt at TRL recommended them as they are meant to be a good fit and a decent increase in size over standard.

andrew186 4th May 2012 06:10 PM

SVM/GTC K&N intakes.. and yes they are much louder than stock. im running svm 650r

Henry 145 4th May 2012 07:42 PM

Litchfield Stage 4 and the intakes sound awesome both from within the car and for those outside

Anders_R35 4th May 2012 07:48 PM

I've got GTC intakes with K&N filters. Much louder than stock, extra turbo whistle and induction sound :D

Stevie76 4th May 2012 08:21 PM

Quote:

Originally Posted by andrew186 (Post 1621418)
SVM/GTC K&N intakes.. and yes they are much louder than stock. im running svm 650r

+1 :thumbsup:

vxrcymru 4th May 2012 09:43 PM

I'm running the litchfield forge intakes and they are a bit louder than stock but the induction noise is no where near ones I've run in evos in the past.

vxrcymru 4th May 2012 11:40 PM

I'm running the litchfield forge intakes and they are a bit louder than stock but the induction noise is no where near ones I've run in evos in the past.

Taff1275 5th May 2012 01:28 AM

Quote:

Originally Posted by Anders_R35 (Post 1621473)
I've got GTC intakes with K&N filters. Much louder than stock, extra turbo whistle and induction sound :D

+1 Sound good, also have injectors & exhaust so stage 4

robsm 5th May 2012 02:41 AM

+1 for GTC

I don't hear much noise from it over the exhaust.

robsm 5th May 2012 03:23 AM

https://www.gtr.co.uk/forum/164407-dr...ic-piping.html

this look quite nice

Ja5on 5th May 2012 04:29 AM

Yep, had a chat with Karl last week and got the pricing

charles charlie 5th May 2012 08:54 AM

GTC with ITG filters on mine.

Easy to fit using the install guide I posted up a while ago. Here you go

Makes the engine feel much more free.

MidLifeCrisis 5th May 2012 10:26 AM

GTC intakes going on soon with the help of CC's excellent fitting guide.

vanos 5th May 2012 06:34 PM

Same here. GTC intakes going on today :)

Thinking of trying the inlet pipes too but they seem very hard to install.
Got those free of charge from Ben as a compensation for something that (in my opinion) wasn't even his fault! :thumbsup:

[email protected] 8th May 2012 01:40 PM

Intakes and R600 tunes are very popular lately

We went though a few design tweeks but now very happy with latest intake for calibration (closely follows oem maf curve), fitment, performance and price.

http://i65.photobucket.com/albums/h2...ulture/008.jpg

Almost ever tune on OEM air boxes to 14psi will hit 4.8v MAF resolution with celling being 5.0V but you'll want some head room. Although the OEM airboxes are a very good design and the best filtration from dirt sadly slightly too small when using the maf based mapping.

Intake design (position of MAF, diameter and filter choice) is important, we have mapped every design out there many are very similar as only so much space to work with. Have my favourites and some owners i'll have to advise it won't map well.

Maf on a bend doesn't work. Not keen an maf too close to filter and inside engine bay

logs on these two were horrible with 130% correction at one maf v and 80% at the next

http://i65.photobucket.com/albums/h2.../badintake.jpg
http://i65.photobucket.com/albums/h2...lture/bad2.jpg


Have mapped quite a few HKS Racing suction, they are expensive 1,100 + and hit 4.8v with 14psi, also wouldn't want a foam filter this thin

http://i65.photobucket.com/albums/h2...e/DSC05740.jpg


All times are GMT. The time now is 07:26 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
http://www.Tyreforums.com


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.