GT-R Register - Nissan Skyline and GT-R Drivers Club forum - View Single Post - Help, how do i remove these bits
View Single Post
Old 4th December 2013, 08:13 PM   #9 (permalink)
goldgtr35 is Running 1026 BHP and 850 Lbs torque
goldgtr35's Avatar
Join Date: Aug 2012
Location: KENT UK
Posts: 1,423
Originally Posted by pwpro View Post
3m tape on both

top GTR logo section first

drive a plastic wedge carefully into the end nearest the door and create a gap then CAREFULLY trim through the adhesive with a craft knife

the lower vented section will then simply pull out with a little back and forth twisting

Are you sure you've done this sort of thing before,,Mate
goldgtr35 is offline   Reply With Quote