GT-R Register - Nissan Skyline and GT-R Drivers Club forum

GT-R Register - Nissan Skyline and GT-R Drivers Club forum (https://www.gtr.co.uk/forum/)
-   General Nissan R35 GT-R Chat (https://www.gtr.co.uk/forum/general-nissan-r35-gt-r-chat.html)
-   -   Ecutek Laptop Software? (https://www.gtr.co.uk/forum/253233-ecutek-laptop-software.html)

G2GUV 5th April 2014 03:30 PM

Ecutek Laptop Software?
 
Which Driver do I need to download from Ecutek's website to be able to reset fault codes on my car?

There are a few options:

License Key Drivers
Vehicle Interface Drivers
??? :nervous:

I'm a bit lost!

Can anyone guide me please?

OldBob 5th April 2014 05:02 PM

Download and try using the EcuTek App downloader first.
EcuTek - Downloads this gets you the file AppDldInstaller.exe

Then: as instructed
Instructions

Download and run the EcuTek App Downloader
Click on 'Install Drivers' and follow the onscreen instructions
Plug in your EcuTek Licence Key (which might be built into your Vehicle Interface cable)
Click on 'Install EcuTek App Downloader' and follow the on-screen instructions


Thers a sw install guide here too:
http://www.ecutek.com/Files/Download...sta_and_7.aspx

G2GUV 5th April 2014 05:09 PM

Thanks Bob,

I have now installed the App Downloader and have managed to communicate with my car.

Finding it difficult to clear a tcm error code though!

Is there a particular way that this needs to be cleared??? I have done the usual way but the error still remains??? I must be doing something wrong!

Do you have any experience in doing a 'Clutch Re-Learn?'

OldBob 5th April 2014 05:18 PM

Only in as much as I watched them do it at Litchfield and it was really simple. I've mentioned the TCM tool and button to press in your other thread. I know it's a bit complicated if you've not done it before and I'm no particular expert but trying to remember what I did rather than sitting in front of my car with it connected myself. Let's see if we/others can talk you through it this way first though. The help files aren't bad to start with.

G2GUV 5th April 2014 05:35 PM

Thanks Bob - Much appreciated.

OldBob 5th April 2014 05:52 PM

Let us know if/when you get it sorted.


All times are GMT. The time now is 06:59 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
http://www.Tyreforums.com


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.