rb20det crank pulley marking problem
what will happen if crankshaft marking at 20°-30° when no 1 piston at TDC with cam pulley marking is ok..what kind of symptoms probably occurred?can it causes engine only run when CAS sensor to fully counter clockwise pos?if set it to middle or clockwise engine very² sluggish(cannot move)and always stall.
Put in 15 BTDC with the idle valve disconnected and blower off.
|All times are GMT. The time now is 01:00 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.