|31st August 2019, 01:53 PM||#1 (permalink)|
hoodedreeper is finding nismo
Join Date: Oct 2004
Cars owned: R34 GTT '01
R34 GTT Oil Cooler Info
I've been reading up on what I need for an oil cooler. I'll be using 10-AN fittings but I'm getting clashing info on the cooler core size that's required. The two kits I'm looking at are the Hel/Setrab and Mocal, both will include a thermostatic plate.
Oil Cooler - Nissan - R32 R33 R34 Skyline / S13 S14 S15 Silvia / Pulsar GTIR / 350Z 370Z - Oil Coolers & Kits - Cooling - Engine & Exhaust | JDM Garage UK - Nissan Specialists
Hel offer 13,16,19 and 25 row coolers but don't give any recommendations for size for the application
Mocal's listing includes a 10 row. As a rough guide they recommend a 13 row for applications upto 200hp. I'm currently circa 300hp but will be around 400hp by the time I'm finished.
I'll be mounting the cooler in the driver side wheel arch infront of the windscreen washer bottle. I'll be fabricating a duct for the Altia bumper to help with slightly better air flow.
Would it be the case of measuring up what room I have and order accordingly?
2001 R34 GTT
|12th November 2019, 07:57 PM||#2 (permalink)|
Ares is upside down behind the telly...
GTR.co.uk seasoned Member
Join Date: Jul 2013
Location: Auckland, New Zealand
Cars owned: BNR34 GT-R V-Spec
I ran a small Trust/Greddy kit (like the smallest, i think it's a 10 row?)
Worked flawlessly, wouldn't touch any other brand.
Couldn't get the image to embed, so here's a link
Last edited by Ares; 12th November 2019 at 08:01 PM..
|gtt, hel, mocal, oil cooler, r34|
|Display Modes||Rate This Thread|