I've been meaning to try and make a comprehensive comparison in regards to the RB26, a stroked RB28, and a RB30.
Now each have their pros, cons, sweet spots, and most suitable application.
I want to try to obtain more context and information into the more technical side of these setups...
Got an RB26 that's going to get rebuilt, but I wanted some opinions (with evidence to back it up if possible!) on Main Bearings and Rod Bearings.
The Block is a stock RB26, Crank is a N1, Rods are a Nitto I-Beam, and tomei oil pump (with supertech spline gear)
My end game power figure is...
I need some assistance with something that's been concerning me.
[Edit] Forum wont let me post the link, please PM me for that, I'd appreciate it!
After the engine starts and idles, the engine is revved and around 2:55 there is a subtle but audible 'rattle' noise, almost as if something sounds...
Anyone use a steam cleaner for engine bay / suspension / interior cleaning?
Any recommendations ?
Do you use a small portable unit.
or a slightly larger unit, with long flexible hose...
I am trying to import a Rb26 engine component from the guys at Car Engines UK - The One Stop Shop For Used Engines
Since I do not live in the U.K. I was hoping to seek some advice on the forum who have experienced in dealing with them.
I asked to forward the payment via paypal or...
ok so here's the full story... i noticed louder than normal valve-train/engine noises. almost coming and going in a rhythmic pattern. i didnt like the sound of it and parked it, and right before i shut it down it started making some horrible noises . i borrowed my friends compression tester and...
F1Carbon only produce the highest quality carbon products. We have produced some dry carbon Engine covers for the GTR. Remoulded for a Perfect fit (no clearence issues) and stunning looks.
3 in stock.
£450 plus £20 next day delivery
F1carbon only produce the highest quality carbon products. We have very limited numbers in stock. Made from autoclaved carbon not cheap wet lay up like other's availabe. High temp resin so no warping. Actual fastening points not just holes. Altogether a far superior product.
Anyone aware of a suitable, reliable and secure Remote Engine start, for my R35. I wake up in the morning, and my car is only a few feet away, surely must be a solution out there ?.
got my service done at Nobles in edinburgh on Friday, well impressed with lay out & service center, very friendly, and not up there ass like the audi/bmw/porch placed that i have been used to dealing with in aberdeen.
on service bill its says Filter Kit-air @ £49.51 , are theses different...
I have just got my GTR back from it's 30 month service only to notice that when I start it, the oil level low message appeared. I checked the dipstick which was dry.
I have spoken to the dealer and have had the car transported back to them.
Obviously I am very concerned about what damage has...
Does anyone use Fuchs engine oil in their GT-R? The guy where I maintain my wifes' Evo X had nothing but praise for Fuchs Titan Race Pro S 10w50 so I am curious if anyone's using this oil in their GT-R?
NISSAN SKYLINE RB26DETT
COMPLETE ENGINE WITH TURBOS
INCLUDING ANCILLARIES, PUMPS, PULLEYS, STARTER MOTOR, CLUTCH FRONT DRIVE SHAFTS, BELTS, INTAKE AND EXHAUST MANIFOLDS
EVERYTHING PICTURED WILL BE INCLUDED IN THE SALE
CLUTCH AND FLYWHEEL ALSO INCLUDED!!
CAN'T BE MORE "COMPLETE" THAN THAT...
NISSAN RB25DET COMPLETE ENGINE WITH TURBO
INCLUDING PUMPS, PULLEYS, ANCILLARIES AND BELTS
ALSO CLUTCH AND FLYWHEEL INCLUDED!!
CANT BE MORE "COMPLETE" THAN THAT!
APPROX MILEAGE 70K
14 DAY WARRANTY
NO KNOCKS, NO SMOKE GUARANTEED.
TESTED BEFORE REMOVAL
CAME OUT OF AN R33 GTST...
For those who run a second car especially Turbo Diesels for fuel economy... we can save you EVEN MORE on fuel! up to 15% in fact! Plus we can get you up to 20% more performance!
From ONLY £249.99! (most tuners charge £450+)
We can even remap vans and trucks as well as normal road cars :)
Hey everyone let me just start with abit about myself, my name's Omar but most people call me Moogles ( just a nickname given to me by some mates ) I'm 15 years old and know just as much about GT-R's as any other GT-R enthusiast, I've been inlove with them ever since I was 11 and know literally...
Hi there, I've had a bit of a bobo with my new(ish) R35. I don't know much about engines, only a rough idea of how they work, so any advice on here would be greatly appreciated.
I recently took my R35 to Monza, Italy. The car has not been modified at all except the Y-Pipe exhaust which was...