GTR Forum banner

wrong-forum

  1. High level 'OEM' style rear wing

    General Nissan R35 GT-R Chat
    Hi all, Currently trying to decide which carbon rear wing to go for. I'm want to keep an oem-ish look. So I'm torn between the oem size one or the 'high level' oem style one for a subtly more aggressive look. Anybody got a high level one fitted and got some pics? I'll probably source it...
  2. Anyone fancy this ????

    Non-Skyline / GT-R chat
    Join us at the PH birthday party - PistonHeads Was thinking of it for a PETROL HEAD night of extravagance !! :clap:
  3. Its gonna cost ya!

    General Nissan R35 GT-R Chat
    So after talking to Mr Miskin yesterday I called up Iain @ Litchfields and asked him to add a little something to the already long list of jobs he is doing for me in March! The list now reads: Red top engine with LM 3.8 GTR custom piston, rods etc LM800 Turbo conversion Dodson 1st Gear...
  4. Transmission Help

    General Nissan R35 GT-R Chat
    Could do with some advice here chaps. I have a cobb for my car so am well versed in gear learns and touchpoint adjustments but nothing seems to cure what is going on with my GTR. at temp or cold and on any slope or flat ground when I put my GTR in 1st or Reverse I get a noise from the gearbox...
  5. Asnu injectors

    General Nissan R35 GT-R Chat
    Do they do a 14 hole 1100cc for GTR
  6. Only lasted 3 months

    General Nissan R35 GT-R Chat
    As most of you know , just before Christmas I had stage 4.25 with down pipes, The 102 Litchfield full system, With the new pops and bangs map Well can't wait any longer , booked in for next Saturday for the 4.5 I going to say it, that's it then. Lol Still loving the buzz ever time I drive...
  7. R35 - What are your average public road temps?? Engine/Coolant/Trans

    General Nissan R35 GT-R Chat
    Hi, R35 - What are your average public road temps?? Engine/Coolant/Trans I got my bro to take the picture whilst on the motorway..curious to see what other people's are as a comparison Motorway - Engine - 70-75ish Coolant -75-80 Trans -75-85 C :flame:
  8. BOV bung size

    General Nissan R35 GT-R Chat
    Does anyone know what size bung I need to block off the recurc pipe, when fitting BOVs please. I'm wanting to turn some on the lathe for my GTR at work. Cheers John
  9. GTR exhaust help?

    General Nissan R35 GT-R Chat
    Anyone know the make of this exhaust? http://img.photobucket.com/albums/v135/mccurleg/9DB9AC2A-B24F-4105-AD7F-DAC30CADE06C.jpg http://img.photobucket.com/albums/v135/mccurleg/79D3CBD9-1A76-4D2D-A1E6-DF05C5D9CE73.jpg
  10. Turbo timer on R35

    General Nissan R35 GT-R Chat
    There is sense to put this on the R35? Anyone with it on R35?? What brand and model any feed-back? Thx
  11. TPMS receivers and wiring loom madness

    General Nissan R35 GT-R Chat
    Hi all, My car is currently at the HPC in Bristol for accident damage repair (thread and photo here) and one of the things they have found is that the TPMS receiver located above the wheel has been crushed*, along with the plug attached to the wiring loom. I actually had no idea each wheel had...
  12. How quickly can air filters get blocked?

    General Nissan R35 GT-R Chat
    Hi all, Four months ago my car had its 48 month service by a GT-R specialist which included replacing the air filters with OEM ones. My car is currently at my local HPC for something else and they have advised me that the air filters are dirty and need replacing. Is it possible for the air...
  13. Squeaking

    General Nissan R35 GT-R Chat
    Same kind of sound when you have a loose belt, only on cold start-ups, disappears a few mins later when warmed up a little. I have a service due soon, so will get it looked at. Should it be something I should be seriously worried about ?
  14. Power steering cooler

    General Nissan R35 GT-R Chat
    I seem to have a leak from my one..... Has anyone else had this problem?? So my decision.... Get another oem one cheap as people that change them don't want the old one Or Get an uprated forge one??
  15. Xtreme 4wd billet clutch housing

    General Nissan R35 GT-R Chat
    We have been busy machining our 4wd billet clutch housing today, these are now ready to be anodized for durability. These will be available with our 4wd gear kit and clutch pack, this kit will run 12 wide friction plates which will give approximately 60% more friction surface area over stock...
  16. brake pads

    General Nissan R35 GT-R Chat
    looking to replace both front and rears for fast road use whats the popular choice i think pagids are out of my budget
  17. Circlips & 54 Month Service SVM

    General Nissan R35 GT-R Chat
    Just want to say a big thanks to the guys at Severn Valley Motorsport after picking up my car last night following the 54 month service and gearbox circlip upgrade! It was definitely a worth while trip from Bristol Also fair play to Amar and the guys they answered every question I had about the...
  18. Help with 19" wheels

    General Nissan R35 GT-R Chat
    Does anyone know which 19" wheels fit over the Alcon superkit please? Cant afford to guess this one!
  19. Intakes 76mm

    General Nissan R35 GT-R Chat
    Are they all pretty much the same?
  20. Tyres off

    General Nissan R35 GT-R Chat
    Hi all Can anyone recommend a tyre company in The Cannock area of the west mids Need new set of tyres putting on my wheels Are the tpms valves easily removed and Changeable onto a different set of wheels. ?? Thanks all
Top