GTR Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter · #1 ·
Hey. I was wondering if any of you could give a listing of your 1/4 mile times combined with the amount of BHP you put down. ATW naturally..

just to give me an idear what i might run at the next event.

thank you
 

·
Registered
Joined
·
89 Posts
Discussion Starter · #2 ·
Should say I drive a GT-R33 with a complete stage-1 kit, and running around 440 bhp atw...
 

·
Registered
Joined
·
1,880 Posts
it is more about clutch than power.

I ran 12.7 with 415 @fly

440 at the wheels is a lot for a stage 1 car. unless you are calling the stages of tune differently to here.

list your mods and someone here will have done it with similar power already.
I'd say you should see mid-high 11's if your clutch is up to it.

/Steve
 

·
Registered
Joined
·
89 Posts
Discussion Starter · #4 ·
I can't remember what barand for what part, as I am changing it all for JUN.

But I have uprated: pump,
injectors, 600 cc i belive
downpipes, HKS
steel turboes, HKS
trippleplated clutch, ?
oilcooler, ?
and Engine manigement systems is Apexi.
 

·
Registered
Joined
·
89 Posts
Discussion Starter · #6 ·
Nice run you got the Seagull...

I'm hoping for around 11.30sec... maybe 11 flat...

timed at a 0-60 @ 4 sec. flat.average.
 

·
Registered
Joined
·
1,880 Posts
my 33 was 4.2 timed by banzai in a feature shoot with loads of us a few years ago now...

had 415 at the time, it all depends how hard you are prepared to launch it, you should get it under 4 with enough lack of mechanical sympathy:)

/Steve
 

·
Registered
Joined
·
2,359 Posts
At 400 BHP 12.01 quater mile and 0-60 of 3.7 without the encumbrance of Mechanical sympathy.:nervous:
 

Attachments

·
Registered
Joined
·
204 Posts
last run with 363whp was 12.01sec 1/4mile :)

now the car has a few upgrades and dont know what time it wil run?

os-giken sequential gearbox quadplate hollinger draggears
1000cc injectors plenum+trottle 100mm. 12mm fuelrail hks
garrett tubo's GT2860 A/R 0.86 garrett blow-off valve

car wil have +-500bhp i think. no headgasket ore inturnels don yet
go's next week to rk-tuning for mapping. is 500bhp safe to run ?

 
1 - 12 of 12 Posts
Top