GTR Forum banner
1 - 20 of 31 Posts

·
Premium Member
Joined
·
1,261 Posts
Discussion Starter · #1 ·
hi all

i have tow 2860 turbos bought from owen developments in november 2007.i have the invoice for £1160,the turbos are ball bearing and come with stainless stell elbows,braided oil lines and actuators.

one of the turbos is faulty and will need a rebuild.dont understand why its gone wrong when they have only done 50-100miles max.?

anyway im after £800 for both collected.





i also have a trust steel downpipe thats off a r32 gtr.no holes or any faults with it.

im after £150 for it collected




many thanks all

leo
 

·
GTROC Co-Founder.
BNR32
Joined
·
6,680 Posts
I know this isn't much help, but I would have bitten your hand off 12 months ago when my engine was out. :bawling:

Surely someone will have them for £450. What a bargain!!!!

You can have the bump for nothing! ;)
 

·
Registered
Joined
·
2,703 Posts
May take the good turbo off you without the elbow.

Can you advise, when the other turbo failed, was it put on to a rebuilt engine? This causes, according to Garrett a lot of turbo failure due to the oil ways not being cleaned properly and damaging the bearings.

Cheers,
 
1 - 20 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top