GTR Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
60 Posts
Discussion Starter · #1 ·
I got a friend who's going to have a set of endless 6pot on his 350Z (just for the front). I'm wondering if I can use his std Brembo brake (with brake discs) as a upgrade for my R32 GTR. I got 18' wheels so there should be enough room for it. Is it going to be a straight fit?
 

·
Registered
Joined
·
733 Posts
I read somewhere that the brembo set up on the 350z has the wrong angle on the calipers when mounted. It's something like 6% degress out.

Can't remember where I read it, But Abbey, RB motorsport or Sumo power should clear it up.

I research this option months ago, Since then I've found a R34 GTR set.

If I was you I'd go for the new K-sport brake option which comes with 356mm or 330mm discs, Calipers, Pads, Brackets etc. £1000
 
1 - 2 of 2 Posts
Top