GTR Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
811 Posts
Discussion Starter · #1 ·
Has anyone any experience with Pace Products uprated intercoolers for Skyline GTR's ?

At an exchange price of £390 they claim some pretty impressive stats;

By fitting our high efficiency Pace 2R40-type core, we can achieve the following advantages over the standard unit :-

* 44% thicker core - for better cooling.
* 10% more frontal area - to pick up more cool air from the front of the car.
* 91% more internal flow area - to alleviate pressure drop at high revs.

The upgrade utilises all the standard hoses & fitting points. Therefore, it is easy to fit.

In order to enable us to fit the high efficiency core we cut, flow, and modify the cast end caps from the standard intercooler.

£ 390.00

EXCHANGE ONLY

http://www.paceproducts.co.uk/automotive-parts.shtml

??? Anyone on the list bought one ???
 

·
Registered
Joined
·
477 Posts
Mark,
You can put me down for one if they are any good. You still havent come back to me with the cost of the bigger injectors, airflow meter, fuel pump etc etc for my GTS25t and this money is begining to burn a hole in my pocket

Paul
 

·
Registered
Joined
·
6,091 Posts
I have one :D
Dyno'd @ Tuning Japanese with standard intercooler 383 bhp
Dyno'd @ Tuning Japanese with pace intercooler 411 bhp
I,m happy with it
When I fitted it I also fitted an intercooler spray.
These were the only mods to the car between dyno runs :D
Hope this helps
Best regards Alan
 

·
Registered
Joined
·
1,757 Posts
Have one too

and fitted by the boys in blue in Oxted.
Very happy with it and top value for dosh! Seems to pull a lot harder a top end with it and much more torquey.

An absolute must.

Give abbey a call.

NLW
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top