[T.F.S.]

hi

cant seem to run stock boost on the GTR32 even with a boost controller

i have tested the opening pressure of the actuators at 0.7 bar, they do not open fully till 1.1-1.2 bar

i take it these must be uprated items?, not stock actuators?

regards, brian

 

[Tony G]

Actuator pressure is normally measured at the point of just cracking open not when fully open. Pressure test again and look for when the actuator arm just starts to move, thats usually the advertised pressure.

Tony

 

[ExScoobyT]

If they are `cracking` at 0.7bar they are uprated items........std will be around 0.3bar.