GTR Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
453 Posts
Discussion Starter · #1 ·
Alright everyone,

Below is the results Andy @ AMT has sent me to show how restrictive the throttle bodies are on a standard RB26 head.

The blue curve is with the throttle bodies, the green curve without. Both had radius inlets.



As you can see there is a drop of 16 CFM!!

The blips at the bottom are due to the spacing being quite big increments, but it gets the results across.

cheers

Blue32
 
1 - 4 of 4 Posts
Top