GTR Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
468 Posts
Discussion Starter · #1 ·
Hi All,

I've started to collect various parts to upgrade My R32, so far I've got :

An uprated ARC intercooler
ARC air box
HKS turbo elbows
HKS twin ssqv dump valves
A.P. Racing 343mm x 32mm 6 pot front brakes

the question is, if I fit all this could I do any damage to the engine on the way to get it mapped ? Obviously I'll be taking it easy and keep it off boost.

Also will the brakes clear the original 17" x 8" wheels ( V spec 2 )or will I have to wait until I get the 18's ?

Cheers for any help.


Baz. :bowdown1:
 

·
Registered
Joined
·
245 Posts
I suspect the brakes may be an issue, might just fit but nornally 330 is starting to get to the limit of 17's. The other bits should be ok, just drive it gently until you get it mapped. The elbows and the ARC IC may increase your boost vs. where it is now.
 

·
Registered
Joined
·
468 Posts
Discussion Starter · #3 ·
Cheers matt,

I thought the brakes might be an issue, no problem I'll just have to wait for the new wheels.

I was thinking of going to Abbey motorsport or rb motorsport, but there's a place near me called Rising Sun motorsport, have you had any dealings with them at all ?

Cheers.

Baz.
 

·
Registered
Joined
·
3,803 Posts
I use Abbey at the moment fwiw, but I have heard lots of good things about RSP and have been to a couple of dyno days there - great guys.
 
1 - 4 of 4 Posts
Top