GTR Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
377 Posts
Discussion Starter · #1 ·
I've got all the parts together to make a flocker. Just wondering if anyone has experimented with this in the past as I'm trying to work out if it's worth either buying a "pro" machine for it, or just leaving it to the pros themselves. I could really do with the convenience of being able to do this whenever I feel like it, and am going to have a lot of bits, including two complete dashes, that will need doing in the near future, so getting a company to do it is going to be a PITA, and expensive.

Any ideas?
 

·
Registered
Joined
·
861 Posts
If I was you,as long as you get the best machine you can afford. I'd do it myself.... Best thing to do is if you do try it yourself, try it on a test pice before doing the dash. Good look with it mate, if you do it yourself put some pic up of the parts. :thumbsup:
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top