[psd1]

I have a 1999 R34 GTR and the guy who is doing my alignment here in Germany needs to know the Toe in and Castor. Can anyone help me out? It has aftermarket lowering springs on it if that helps...

I appreciate the help as always.

Shawn

 

[Nobby666]

I had my alignment done recently so heres the settings taken from the report
there is no degree button on my comp so put a fullstop instead this is for a r34gtr 99-02.

min max
front caster left 3.10' 4.40'
right 3.10' 4.40'

camber left -1.35' -0.05'
right -1.35' -0.05

toe left 0.0 0.5
right 0.0 0.5
total 0.0 1.1

rear camber left 1.45' -0.45'
right 1.45' -.045'

toe left 0.0 1.1
right 0.0 1.1
total 0.0 2.1



secondary angle


sai left 15.20' 15.20


my car is also on lowering springs this put my camber out slightly but there is no adjustment unless you fit a camber kit i believe

hope this helps
Rob

 

[Nobby666]

doh typed it out in nice neat columns now look at it. just to clarify these are min and max settings.

 

[psd1]

Thanks nob!

 

[sean_goodman]

to adjust the camber fully you will need to fit adjustable top arms such as the ones from cusco (i used these and they are very good). front and rear.

my local tyre centre who does 4 wheel alignment actually found the gtr on the computer database. upon advice from RB motorsport i went for

Front:
camber -1deg 32 min
caster 3 deg 28 min
toe in 0 deg 08 min

Rear:
camber -1deg 20 min
toe 0 deg 14min

 

[psd1]

Sean, can I get the name and number of your local shop perhaps so my guy can call him?

Thanks!

 

[sean_goodman]

sorry for the delay i have been on holiday.

i am at work at the moment and cant remember the name of the shop, it was in walsrode though. when i get home i will try and find the paperwork and reply to your pm

cheers

 

[psd1]

Thanks Sean