GTR Forum banner

1 - 7 of 7 Posts

·
Following EJH#25
Joined
·
6,841 Posts
Discussion Starter #1
Hi,

I have an Apexi Power FC-PRO, which is not locked, but is a first generation unit, which apparently uses a different software edition from the latest model.
I have the commander with the FC-PRO, but would like to get the best out of it using a laptop.
Has anyone used the software below or know if it will be compatible with my FC?

http://www.reworx.co.uk/
FC-DATALOGIT LINK.

Any advice would be greatly appreciated.

Matt.
 

·
Registered
Joined
·
6 Posts
Matt, we have some pro chips here and will be testing FC-Datalogit on the old power fc with pro chip in the near future.

We have made FC-Datalogit for GTR32/33 DETT but it will not work on Jetro because we haven't configured the 'P' maps for map sensors as opposed to airflow meter.

The pro chip is just a replacement chip in the Power FC. You can only install the chip in the old model power fc. The old model has a socket for the main chip where as the later model has the chip hard wired and can't be changed.

Keep in touch with Ant. He will be the first to know when we have a pro chip version.

Glen
FC-Datalogit
 

·
Following EJH#25
Joined
·
6,841 Posts
Discussion Starter #3
Power FC-PRO.

Thanks for the reply.

Does that mean that the PRO chip can be replaced with the normal chip then and the software would work?

If so, I have an E/EPROM Blower and could make a few copies.

Cheers,
Matt.
 

·
Registered
Joined
·
6 Posts
As far as i know, yes.

Find someone with an old Power FC and swap the chip.
You could burn your pro chip and share it with your mates!
Would only work if they have an old 2:~~ Power FC



Glen
 

·
Registered
Joined
·
7,272 Posts
Glen,
The Ant you speak of above, is that Nemesis ?

If so then I thought he was running RB25DET ?

Do you know if your software works with the RB25DET PFC ?
 

·
Registered
Joined
·
6 Posts
>>The Ant you speak of above, is that Nemesis ?

No. Ant
E-mail Address(es):
[email protected]

Our FC-Datalogit dealer in the UK


If so then I thought he was running RB25DET ?
Do you know if your software works with the RB25DET PFC ?

I doubt it.
We would have to try one out.
Need a donor car in N.Z. if you know of one.

Glen
 
1 - 7 of 7 Posts
Top