[Niclas910219]

Hi guys
I having fault codes 11 and 13 on My attessa Box. So i checked the g-sensor and follow the guide on this forum. The problem is that i Ohly gets 1.84V at most. I have the car running during messure.
What could be wrong?

Thanks/ Niclas

 

[R32 Combat]

Where are you reading the voltage?

Read it on the output of the ATTESA C/U. This will determin is you have a high resistance joint/broken cable or is the power supply is ****ed.

 

[Niclas910219]

Iam reading it on the pins 2, 5, 6
Where is the output?

 

[R32 Combat]

This any good?

http://www.skylinesaustralia.com/forums/topic/368646-attesa-e-ts-pro-ecu-and-abs-unit-connector-pins-id/

 

[CSB]

I've got 8 and 9 which is abs related but that was removed ages ago and I didn't have any errors then. What could it be? Still stops the 4wd from working.

 

[Niclas910219]

Hi guys
I get 2,5v now but attesa still gives fault code 11 and 13. Now What?
Is There gonna help If i buy a knew g-sensor

Thanks

 

[R32 Combat]

Have you measured the voltage at the other end of the wire by the ATTESA CU?

 

[Niclas910219]

Where is that more specific

 

[R32 Combat]

Have you read the voltage at the G-Sensor end of the wire or the ATTESA CU end? I've had issues with the connector on the ATTESA end. You might even have a cracked pin or dry join in the ATTESA CU.

 

[Niclas910219]

Yes i have Done that now. And nothing seems to be wrong.
I am sure that the g-sensor is broken, it has also indicated red on the little pin outside the sensor Unit.
I see you sell digital ones. Are they any good, could you ship to Sweden?

Thanks / Niclas

 

[Brains]

If you have your way pass Gävle you could borrow mine and see if it works.
And I can say that when I'm going to buy a new g-sensor /attessa control unit it will be a Skylab fusion.

 

[R32 Combat]

Thanks Brains.

I'd happily sell you one Niclas but you need to be sure your G-Sensor is broken but to me it sounds like a wiring or ATTESA CU issue.
I'd hate you to buy a new G-Sensor and it not fix your issue.

 

[Niclas910219]

Hello
Checked everything i would be happy to buy a g-sensor from you

How much for shipping to sweden.

 

[R32 Combat]

They are £200 shipped to Sweden.

 

[Niclas910219]

Hi
Im interested in one If There is possible Could you send me one.
Here is my adress

Niclas cronholm
Solskiftegatan 9
44253 ytterby
Sweden

How is payment done?

 

[R32 Combat]

You have a PM

Hi
Im interested in one If There is possible Could you send me one.
Here is my adress

Niclas cronholm
Solskiftegatan 9
44253 ytterby
Sweden

How is payment done?

 

[CSB]

Any help on error 8 and 9?