GTR Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,201 Posts
There is a main adjuster bolt which tightens the belt, there is teh main bolt which holds the pump to the bracket and pivots the pump when tightening.
There is also a bolt to lock it all up.

If you look at the main bolt that tightens the belt, you will see it threads through a block. If this block has a hole in it you have a M8 bolt missing which locks the assembly, if there is on in there then it is most likley loose.

Cheers

Rob
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top