GTR Forum banner
1 - 1 of 1 Posts

17 Posts
Discussion Starter · #1 ·

I've just installed the Blitz SBC-iD and wondered if anyone else has had experience with its setup.

From the instructions it says that you can't leave the boost setting in auto, but have to put it in manual for all twin turbo and high boost cars. Auto gives actual boost presure readings but manual gives a 0-100 percent scale.

I first set the unit to 60 and this gave 1.15 bar (still on standard turbos). The next day it was really cold and the boost shot up to 1.25, so had to back it off to 55.

This is quite irritating so does anyone know if the auto setting will work, and what settings on gain to use.


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.