GTR Forum banner

1 - 3 of 3 Posts

·
Banned
Joined
·
1,306 Posts
Discussion Starter #1
just got my tt gtr , when i was looking at the history there was a diagnostic r/road report some few weeks old 390 bhp was the figure, sound i was chuffed to bits . i believe it may be chipped to 1 bar hence the figure of bhp. formerly i owned a gto tt using a db controler the torque was quite amazing opening up the gain setting produced a really rapid low down acceleration does any one run a blitz controler with 1 bar. any info would be great as i miss that gain setting cheers


gaza :D :D :D :D
 

·
Registered
Joined
·
4,145 Posts
Do you put any stress on the engine with low rev boost levels.

I.E. using the boost controller to have low down boost??

And how hard is it to fit a boost controller.
 

·
Banned
Joined
·
1,306 Posts
Discussion Starter #3
blue i used to run the gto at 1.1bar the nice thing about it was the gain setting this would give the lower speed a much more rapid acceleration. im sure abbey would be able to give a more detailed annalasis ov what happens but they are great fun WHEN USED CORRECTLY ;)
 
1 - 3 of 3 Posts
Top