GTR Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4,821 Posts
Discussion Starter #1
mmkay...

I no longer have working brake lights. Could someone give a bit of detail on the wiring to the pressure sensor on the brake pedal (i'm assuming this is hows its setup)

If not....... er.... hows it work then?

Fuses.... my fuse cover is in the garage somewhere. Which fuse covers the brake lights, and what else is on that circuit?

Any help appreciated :)

Cheers,

Adam
 

·
Registered
Joined
·
4,821 Posts
Discussion Starter #2
fixed it....

The previous owner (jap/uk) had wired something else into the brake circuit. When i removed this i had taken out the weird blue rubber fuse from the incar fuse box that had a wire coming from the front side of it. The 3rd from right on the bottom row.

I replaced this with a 10amp blade fuse, and all is now well.

Just to confirm. There is a pressure switch at the top of the brake pedal. Its pressed in (off) and is on when released.
 
1 - 2 of 2 Posts
Top