GTR Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
161 Posts
Discussion Starter · #1 ·
Hi everyone.

I was going to buy either a Nismo Super Coppermix Twin or OS Giken STR for my R32 after advice from people on here. However I have been offered a used clutch from an R33 that has done less than 1k miles with 3.9mm and 3.85mm left on the clutch plates. I'm a bit weary about buying used parts if they will wear out quiclky so was wondering if people think this is a good buy. It will work out about half the price of a New OS STR which is great as long as the plates won't need replacing again in 6months. I will get a new bearing set before its fitted but is there anyhting else that will need before fitting?

Thanks everyone.:thumbsup:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top