[kuwait_r34]

i work on my rb26 head 272 cams with springs

i make porting&polish and change guaid and put +1 valve with sets now my question:

1- what camshaft cleranse is good for street car to EX-IN (25-30-35-40)?

2- how many valve angle can i make for this work (3-4-5)


i wana car for street not for drag or lap and the turbo is t51r kai>>

:lamer:

 

[bkc]

???????

 

[Autosaurus]

You should have recieved a spec sheet with your cams, use the clearances the cam manufacturer recommends...
The RB26 head has 3 angle valve seats as standard..

 

[kuwait_r34]

is it standard come 3 angle from fctory?

 

[bkc]

is it standard come 3 angle from factory?

whaaaat??? 3 angle from factory ???!!!!!:sadwavey:

 

[GT-R Glenn]

Isnt that pretty much the "norm" 30 / 45 / 60 degrees

 

[bkc]

RB26 HEAD GTR34 !!?

Isnt that pretty much the "norm" 30 / 45 / 60 degrees

you mean cam shaft degree or port INTAKE & EXHAUST ?? OR WHAT ???

PLS: I HOPE CLEAR REPLY ?!!!

 

[Autosaurus]

That is the angles the 3 angle valve seats are cut...

 

[Eivindf]

Why are you so rude with this guy?

If you have not noticed, he is from Kuwait. Not everyone in here has English as their motherlanguage.

Here is a link to a document describing the diffrent angles and specifications of the valves and valveseats. Is this what you are looking for?

http://www.efmotor.no/download/rb26valvespec.pdf

 

[dmcl1980]

Agree with above.
bkc you are a f*****n C**K.

 

[bigkev]

you mean cam shaft degree or port INTAKE & EXHAUST ?? OR WHAT ???

PLS: I HOPE CLEAR REPLY ?!!!

I wonder can you say that in arabic?? GROW UP

kev

 

[kuwait_r34]

thx mr Eivindf and thx for all

 

[Chris Wilson]

Just for you to show we are all not sarcastic devils:

 

[GT-R Glenn]

Umm, sorry I didnt think I was being rude ?

 

[Chris Wilson]

Umm, sorry I didnt think I was being rude ?

Not you Glenn, the other fella

 

[Autosaurus]

I wasn't being rude either!!!