GTR Forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
264 Posts
Discussion Starter · #1 ·
Stock R35 brake kit (Brembo Monoblock) for sale. The package includes:-

1) FR calipers
2) RR calipers
3) 380mm front dics (NO REAR DISCS)

Excellent upgrade for GT-R. Cheap at only @ GBP3,600.






 

·
Registered
Joined
·
485 Posts
Yes they would need an adaptor to fit, although if you contact Rick @ Endless-R he might be able to help as i know they made up all the assisated hard ware to fit the R35 Brakes on the earlier modle R32,33,35's...

Theres a thread on here some were about it, im pritty sure its in with (Rian's) Endless R32 build project) Hope this helps...:thumbsup:
 

·
Registered
Joined
·
264 Posts
Discussion Starter · #4 ·
That's right. Endless R have an adapter made to fit it into R32, R33 and R34.
As you can tell from the pictures, it's very new. I would warrant a guess of perhaps < 5,000km
 

·
Registered
Joined
·
5,726 Posts
Im sure the likes of DB Power could do some brackets allot cheaper than £600!
;)
bob
 

·
Registered
Joined
·
381 Posts
Am i correct in thinking these would need an adapter plate to make them fit r32 r33 r34,
also any idea what sort of mileage the discs have done. thanks.
Yes you are , but you will need a minimum of a 18in rim and specifically a TE37 that does not have an inner bump / ridge in the rim.

and its a very tight fit.
 
1 - 17 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top