GTR Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
287 Posts
gaskets

if your putting new gaskets in on the hot side, then metal is probably your best bet especially on the turbo flange. It all gets too hot for liquid gaskets. As long as the matching faces are square and flush fitting you shouldn't have any problems. Someone told me of thermal barrier gaskets for the inlet side which stops the heat transferring to the inlet manifold, it something im looking into for my next rebuild as my plenum gets pretty hot after i've been running the engine for a while.
Regards, The Freak
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top