GTR Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
76 Posts
Discussion Starter #1
Or timing belt cover...whatever you call it! Where can I get one???


Thanks!
 

·
Registered
Joined
·
76 Posts
Discussion Starter #4
bnr34vspec2
THANKS!!! I'll call Motorex tomorrow!




SkylineUSA said:
Nightmare,

Did you ever install the fan and pullies? Where they what you expected?
Yeah I did. I'm very happy with the way it turned out!

Check it!


 

·
Registered
Joined
·
1,080 Posts
Nightmare,

You are welcome ;)

Who makes the fan and pullies that you have? Is your engine more responsive after the factory fan is eliminated?

Jeff
 

·
Registered
Joined
·
76 Posts
Discussion Starter #7
Piggaz said:
Nightmare... what sort of power is ur GTR putting out?
*DROOLS* hehe
You know. I dunno. I've never dyno'd it but I have every bolt on you can do pretty much. I'll make a short list and maybe you can help.
Greddy Evolution II downpipe(no cat) and 4" catback
APEXi Power FC with 300ZX meters
HKS 4row bar and plate intercooler.
Greddy profec B boost controller.
Electric fans/ Greddy accessory pulleys
OS Giken tripple disk clutch.

What kinda power you think those are good for?:)

Oh and my car is currently under the knife again.

Here are the new bits going on!
HKS Manifold
HKS 60mm GT series wastegate
Garrett T66
720cc injectors






bnr34vspec2 said:
Nightmare,

You are welcome ;)

Who makes the fan and pullies that you have? Is your engine more responsive after the factory fan is eliminated?

Jeff
Flex-A-Lite makes the fans. I am very happy with them and the throttle response I gained. Not to mention how much quieter the motor is without that big clumsy fan.
Here is a pic of them. hehe I take pics of all my bits I install:D

 

·
Registered
Joined
·
1,080 Posts
Nightmare,

My guess is you have at least 420 HP at the flywheel with your current setup :)

Thanks for the fan infos. Where do the fan thermo switch attach to, just wondering.

Thanks!

Jeff
 

·
Registered
Joined
·
76 Posts
Discussion Starter #10
bnr34vspec2 said:
Nightmare,

My guess is you have at least 420 HP at the flywheel with your current setup :)

Thanks for the fan infos. Where do the fan thermo switch attach to, just wondering.

Thanks!

Jeff
You can either squeeze the thermo switch in the fins of the radator or pull the upper hose off and slide it in there. I didnt go with a thermo switch. I rigged one fan to run all the time and the other is controlled by a on/off switch by me.
Runs nice and coooool!:cool:
 
1 - 11 of 11 Posts
Top