[ChristianR]

Hi,

Mine seems to suddently become a bit dodgy. I thought at first it was the AFM, but have now tracked it down to the wire that connects into the connector, which connects to one of my AFMs.

Whats the best route of action? new connector (if so where from?), or get it re-wired?

Regards,

Christian

 

[R33_GTS-t]

Are you sure it's just the wire and not dodgy earths?

 

[ChristianR]

I think so, if i touch the wires that go into the connector area, then the car will almost stall

 

[skylinegtr0415]

ChristianR, i have same/similar problem with mine recently, so i did a search...if its the connector (soldering bits inside the MAF) then i hope this helps:

http://www.skylinesaustralia.com/forums/index.php?showtopic=113284

Regards

Skylinegtr0415

 

[ChristianR]

Thanks, however with mine if I swap the afm's over it still happens on the same one. I believe mine is the actual connector that connects to the afm.

 

[tarmac terror]

Try these

TT

oops, just noticed they were for Z32's....sorry

 

[ChristianR]

Took a video so you can see what I am on about

http://www.cicarscene.com/temp/movie.wmv

As you can see no voltage in the afm at the start, until I hold/push the connector, then it runs as normal until I move my hand.

any suggestions on how to resolve?

 

[ChristianR]

All sorted, was a loose wire, so resoldered and fingers crossed seems to be working now

 

[Davkotavko]

I have problem with afm wiring. Does anyone know oem number of wiring loom for mafs? R34 gtr