[DUNCAN GT-R]

Hi, does anyone have pictures of the coolers under the rear of the car. I'm interested in fitting some (like the UK spec gtr's) but wasn't sure where they're fitted or which pipe line they go in.
Pics of a 33gtr would be greatly appreciated.
Thanks.

 

[NikWilson]

If you use the search function you will see I started a thread on this for the R34 GTR some 2 years ago.

Pics of them fitted to my car can be seen on the web link below.

I did the transfer box and gearbox as they seem to heat up worst. The same principle would apply to the front and rear diff'. You need pipe work, Mocal rads and piston pumps. The pumps are controlled by thermostat switches bonded to the casings.

If you need the Nismo/Nissan piston pumps as used on the UK GTR's I have 3 brand new ones which could be for sale.

You could always find a S13 200SX and remove the diff cooler set up from that and adapt it?


Nik

 

[DUNCAN GT-R]

WOW.... Nice car Nik.
Thanks for your help.

 

[ahapartridge]

Also contact Rockabilly as he did a DIY fitment of gearbox and diff coolers

 

[Ian C]

Try this!

want pics?

http://www.gtr.co.uk/forum/upload/45815-stock-g-box-diff-oil-cooler-plumbing-pics.html

 

[323ian]

So do they use the filler and drain plugs for the feed and return lines or is there a new hole tapped into the case for these?