[GSB]

Right then peeps alittle help please,

Have purchased a already mapped MinesGTR ecu for the R33 GTR, now am i right in thinking its a straight plug and play thing, but i must leave the car running once changed for approx 10mins to allow the ECU to re-evaluate itself ??? is there anything else i need to do also ???

Cheers,

Gurj :clap:

 

[pupsi]

Run it for 10 mins then switch on the rear demister for another 10 mins, then switch on the air con for 10 mins, then it should be done?

 

[MartinC]

Run it for 10 mins then switch on the rear demister for another 10 mins, then switch on the air con for 10 mins, then it should be done?

Thats for a power FC, a nissan ecu needs nothing like that, but like what has been said on the other side you need to know what the mines ecu was mapped for before you just go ahead and run it.

 

[GSB]

Had a discussion on SOC about corrective procedure for this and we have come to the conclusion to take the car to Thor racing, bang the ECU in then and see if the map is ok for the GTR, then correct the boost setting to find its best setting for this ECU,

cheers guys