GTR Forum banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
3,248 Posts
Discussion Starter #1
Hi All,

Is it possible to fit an oil cooler to a standard rear diff, if so, how ?
Are there kits available, or is it a case of buy a pump,pipework and a cooler ?
 

·
Registered
Joined
·
287 Posts
oil cooler

i'd like to know this too, as i've got a full undertray which is heating up the diff and gearbox. Would it be possible to fit a similar setup on the gearbox to keep that cool too?
Regards, the Freak
 
Joined
·
3,665 Posts
Moffy boy, got a few cars with diff coolers fitted.

We can supply the parts , think I have a few S/H Hitachi oil pumps in stock , need to be careful where you mount the cooler to get a good air flow and not be easily damaged by kerbs or debris and the pump needs to be switched on thermostatically (sp) diff oil is too thick to pump when cold.

Give me a ring if you to discuss more.


Mark
 

·
Premium Member
Joined
·
3,248 Posts
Discussion Starter #5
Moffy boy, got a few cars with diff coolers fitted.

We can supply the parts , think I have a few S/H Hitachi oil pumps in stock , need to be careful where you mount the cooler to get a good air flow and not be easily damaged by kerbs or debris and the pump needs to be switched on thermostatically (sp) diff oil is too thick to pump when cold.

Give me a ring if you to discuss more.


Mark
Thanks Mark, will chew your ear off at Pod early Sept with Jonny, a few beers and some boogying to Miss Perry :D

Just emailed you my address for the key :)
 

·
Registered
Joined
·
4,586 Posts
I have all the parts to do diff and tranny coolers.
What I don't have is the thermo switches....Can someone point me in the direction of some inline ones?
 
Joined
·
3,665 Posts
1 - 7 of 7 Posts
Top