GTR Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
818 Posts
Discussion Starter #1 (Edited)
Posted up a while ago that I needed a new rev counter.. Well thanks to Phil69 at conz I stumbled on the thread on how to fix a rev counter.

It really works.. I resoldered all the Microchip joints on the PCB and everything is dandy now. Also of note, I didnt fully unsolder and remove the mircochip from the PCB I just heated up and reflowed the solder, adding some where needed as Nissan must have saved tried to save weight by using sod all solder :D

The guide is below, but as I say no need to fully remove the Microchip, or the posts holding the rev counter needle in place.

http://www.gtr.co.uk/forum/151359-crazy-rev-counter-fixed-guide.html
 
1 - 1 of 1 Posts
Top