GTR Forum banner
1 - 1 of 1 Posts

116 Posts
Discussion Starter · #1 ·
guys, wiil be taking out the stock twins in my rb26dett and replacing it with a FR TS Manifold and a BW 366 ETT Turbo. do not have experience with the rb. would like some info as follows:

Oil Feed To turbo. what size is stock from the head.(need to make up a ss braided line)

What fittings do i need to block off extra oil return port(i am guessing there are two return lines since it is twin turbo.)

would like to have everything in place before tearing it apart.

also need torque sequence for diasssembly and assembly of the head.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.