GTR Forum banner
1 - 20 of 87 Posts

·
Registered
Joined
·
743 Posts
Discussion Starter · #1 ·
Hi Guys,

I have had skyline's for some time now but i think it is finaly time to start a project topic on here.

My first skyline was a R33 GTS-T that i had for a few years


After a crash at Spa Francochamps i had to do some rebuilding and it came out like this


I sold this car to buy a R33 GT-R


This car was to nice to make it into a project car so i sold this one and bought a nice R32 GT-R a few month ago






I will keep you guys updated about the project in this topic
 

·
Registered
Joined
·
743 Posts
Discussion Starter · #2 ·
My holiday started yesterday so i now have time to start with the car :)

It is going to be u full track but still road legal with a lot of modifications on it
First thing is to weld in a complete roll cage with K-Sport airjacks


Yesterday put the car inside the workshop on some stands for easy working




Halve hour later the doors where already of


I also have removed the boot because i already have a carbon fibre waiting to be put on


The wire loom to back removed




And another one from the other side
 

·
Registered
Joined
·
743 Posts
Discussion Starter · #5 ·
Plans for the next weeks is to get the roll cage finisched.

Plans for the futher are custom very small dash ETB race cockpit K-Sport bik brake kit and coilovers.
And a complete rebuild of the engine to above 600hp

I also already have a Bee*r r324 body kit and R32 xenon headlight on the shelve waiting for the car but i think that will take some time before that goes on (if it goes on)
 

·
Registered
Joined
·
57 Posts
It's gonna be a while but will be all worth it in the end!
 

·
Registered
Joined
·
5,726 Posts
looking great thats a hardcore strip out youve done!
;)
bob
 

·
Registered
Joined
·
743 Posts
Discussion Starter · #11 ·
Done a lot more and looking forward to the next steps

I used dry ice to remove the bitumen from the car
That works realy good




Just put some ice on the stuf and wait until it starts making some noice and then you can take it out easy








It has a nice result







But there is still some stuff left like the bodyglue
 

·
Registered
Joined
·
743 Posts
Discussion Starter · #14 ·
Engine specs are also know now and i am going to be running on E85 :flame:

Tomei 260/270 10.8
Tomei type B springs + retainers
ported/polished head
bronze valve guides
HKS pistons step 2 87mm
HKS conrods
OEM rb26 crank
ACL race bearings
N1 oil pump
N1 water pump
Greddy cam belt
OEM idler/tensioner
Trust sump (met STD diff)
Greddy cam gears
ATI race crank pulley
Exedy twin plate clutch kit
Pakkingen
Div klein materiaal
GT2860-5 turbo's incl. pak/div
Injectoren 120cc incl. trust rail

Now i have started to take out the engine


 
1 - 20 of 87 Posts
Top