GTR Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
3,441 Posts
Discussion Starter #1
My new one... hopefully picking her up on Wednesday :smokin:

Spec includes...

1275cc MG metro engine with 286 kent scatter cam, maniflow LCB manifold, RC40 stainless steel exhaust, 1.75" SU carb.

Corbeau forza buckets with 6-point LUKE harnesses.

7X13" supalite alloys with yokohama A008 rubber.

negative camber adjustable lower arms, rear camber brackets, heavy duty tie rods, spax adjustable dampers and a smattering of poly bushes where appropriate :D

The only pic I have so far...



Dan
 

·
GTROC NOBODY
Joined
·
5,981 Posts
Looks good Dan.
I used to have an RC40 racing exhaust on my 1380 cooper. Very nice sound it was too.

Have fun;)
 

·
PornStar Member
Joined
·
3,512 Posts
I've always liked a fast Mini .......









However Robbie junior seem's not to have been bitten by the Mini bug jet, and prefers to be taken to school in a Datsun .....:confused:
 

·
Registered
Joined
·
1,670 Posts
Nice one Dan, you'll have loads of fun in that!
Spax adjustables - I had some on my Mini and anything harder than the softest setting had it bouncing all over the road.
My regret is not finishing it after I started rebuilding it. I had a Janspeed turbo kit I ended up flogging for £60 to get rid of it :(

Happy days in a mini.
 

·
GTROC NOBODY
Joined
·
5,981 Posts
Dan,
Just make sure you declare all mods etc to the insurers.
I had just fitted a double walnut glove box dash to mine with original refurbished cooper dials, a new respray, cooper reverse rims and a set of refurbished cooper discs at the front, costing me 2.5 K and got 1K back from the insurers after some scrote nicked it and burnt it out.:(
 

·
PornStar Member
Joined
·
3,512 Posts
Dan,

Thanks mate, your car looks quite nippy. Is that the rest of your 'fleet', or was the picture taken on a Mini day out ?

I've got to thank Mr Happy (Jim27) for the wheels as it only had little thin ones on it before ...... :D :D

Robbie
 
1 - 15 of 15 Posts
Top