GTR Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
926 Posts
Discussion Starter #1
hi guys, anyone give me a bit of advice on where to plumb in the two pipes from the greddy profec b spec 2 solenoid in the engine bay please? the wires have been put in, there is an original solenoid there, and im just not sure where to join the pipes. kind regards James
 

·
Registered
Joined
·
529 Posts
James. off topic mate, sorry..Please give us your impressions regarding this unit once up and running please..
I want to change from Gizzmo to the Profec B.

Sorry, cannot help with your question off hand..Cheers.
 

·
Registered
Joined
·
376 Posts
With the profec B spec 2 - one of those pipes goes to the outside (pressure) side of the turbo, before intercooler and throttle body, and the other goes to the wastegate actuators. See this manual

There's another line (after throttle body [manifold pressure]) that goes to the unit itself.
 
1 - 3 of 3 Posts
Top