GTR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
177 Posts
Discussion Starter #1
I have just had an engine re-build with forged internals hope of approx 600bhp, i bought an Apexi ECU from a mate from a R34 GTR which i want to fit to my R33 GTR, i have been told that this might not work as the spark amplifiers are built into the R34 coils and the R33 has a seperate amplifier, i have also fitted 2 x R34 Airflows and i an told i need 300ZX airflow to make the power, can anyone help.

Gavin
 

·
Skyline Section Manager
Joined
·
11,878 Posts
You will not get 600 hp with RB26 AFM. You will need Z32 AFMs. You could probably get a R34 ecu to work in a R33 with a slight ignition mod.
 

·
Registered
Joined
·
325 Posts
Think you'd have to do some mods to get that Fc to run in the 33 and as mentioned, you'd need something like Z32's to cope with the extra airflow.
Thought the 34's also had an immobiliser circuit to by-pass and then there's the different CAS. Unsure about the coil packs.
I'd opt for the correct Fc, must be cheap as chips these days.
 
1 - 6 of 6 Posts
Top