[customize]

recently went stage 4 on my car
gtc downpipes
gtc intakes
1100cc ansu
gtc suction pipes
milltek non res y pipe
ecutek

have got some issues with the boost
should be reaching 1.3bar and only making 0.8bar
there is a boost leak somewhere but cant seem to locate
all pipes seem intact and secure
any one have any ideas?

 

[ifty]

Are you checking the boost on your highest setting ?

 

[Adamantium]

Why don't you ask your tuner as a first port of call? If it's Ben, he'll be very helpful.

 

[Takamo]

You can increase the boost from steering wheel cruise control up button, maybe it's been turned down

 

[customize]

boost is turned upto full but is not peaking just about reaches 0.8bar
can hear a leak noise but not sure if its just the intakes or a pinhole
have checked hoses and all seem tight and no obvious tears etc
just trying to find if any one has had similar probs
hoping its something simple
car used to boost fine before added injectors, suction pipes, downpipes?

 

[DODGY]

Check which map you are on, as I have 2 maps

 

[Evo9lution]

Get yourself booked in for a smoke test and this will show you where the leak is :thumbsup:

 

[swoody123]

Get yourself booked in for a smoke test and this will show you where the leak is :thumbsup:

i bought the machine that performs a smoke test..earn't its money 10 fold..well worth checking for boost leaks with it

 

[customize]

ok so have changed the pipes for hard pipe kit, so as to eliminate any hoses, still have the same prob.
Boost is set on high in the correct map, still not boosting past 0.8 bar