[Rjewkes]

Got the car out today after working away for a few weeks and my oil pressure gauge has stopped working ? car seems fine temp/oil level etc, Power fc doesn,t indicate any issues, Any help on possible reasons appreciated.
Also going to change handbrake handle, but how does the old one come off.

Thanks in Advance Roly

 

[tarmac terror]

If the O/P light is on as well when car is started up then you have major problems. If not then its probably the sender. Get a new one or an aftermarket gauge.
Apparently the handbrake handle has to be cut off IIRC.

TT

 

[Rjewkes]

Thanks, the good news is the O/P light is NOT on when the cars running, Done all the normal checks oil level/ temp etc etc and all seems fine.
Is there any checks I could do to confirm the sender to be the problem?


Roly

 

[Cord]

Is there any checks I could do to confirm the sender to be the problem?


Roly

Yes, put a new sender in and be amazed at oil pressure back to normal. :chuckle:

 

[Rjewkes]

DOH, I suppose the next question is where is the best place to get one?

Roly

 

[Cord]

Any of the big tuners will have them on stock. but am sure you can order them from any Nissan dealer (32/33/34 GTR are all the same)

 

[Rjewkes]

Thanks Cord, If i contact Steve (RB Motorsport) could he send me one ?

Roly

 

[Rjewkes]

Update. Spoken to Steve at Rb, posting one out to me today. Great Service as normal.

Roly

 

[Chou]

Get an aftermarket pressure guage. The stock ones are [email protected]

 

[Rjewkes]

Will be looking to buy aftermarket dials to fit pillar pod at a later date, but just want to ensure the car is 100% for now.

Roly

 

[Rjewkes]

Panic over, I fitted a new sensor today and everythings back to normal, Thank God.
Now looking to install A Pillar gauge pod, but can anyone suggest the best gauges to use?

Thanks Roly

 

[Racer GT-R]

The BEST gauges are Defi without a doubt.