GTR Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
hi guys looking for some help please.

I have an r32 RB20DET. recently put in a new set of dials and the needle on my boost guage is off. Where should it be when engine is ticking over. Standart engine and turbo.

I set it at 0 but does not seem right.

Any help appreciated.
 

·
Registered
Joined
·
448 Posts
You will probably find that the gauge should read 0 when the engine is stopped, it will give you a vacuum (-neg) reading when idling then go positive when the turbo comes on boost. My GReddy gauge shows 0 when engine stopped.

Hope this helps.

Cheers
Ian
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top