GTR Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
823 Posts
Discussion Starter #1
I have some Works 18" alloys with the 12mm alan key nuts to hold them on. They are very thin as they have fit into the holes on the wheel which are very small in diameter. Not a very good explanation I know, I am struggleing to describe them :D

Anyway I have 1 missing so my wheel is only holding on by 4 at the moment, I am looking for another, so if anyone has a spare nut kicking around let me know. Alternativley if anyone knows where I can get a new set of this I would appreciate it. ;)

George
 
1 - 1 of 1 Posts
Top