GTR Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
578 Posts
Discussion Starter #1
I have 6 Asnu 950cc injectors practically new for sale...covered only around 1000 miles so pretty much as new, i paid £630 for these delivered, looking for £500. These are up there with I.D injectors and are supposed to be even better. Used alot on the R35's. Im needing 1100cc injectors to make way for a monster build i'm doing so wont be needing these...
 

·
Registered
Joined
·
2,130 Posts
Will these bolt straight into an RB26 fuel rail or will i need a custom one? Are the plugs also plug and play?
 

·
Registered
Joined
·
578 Posts
Discussion Starter #3
Sorry my bad, i should have mentioned, yes they are straight plug fitment but you may need a fuel rail to match, an ebay purple hks copy one works fine... I used to have RC1000 injectors before, and if they fit into a standard rail then these will too... and also a slight mod to the resistor pack is required to change the voltage, pretty straight forward...
 

·
Registered
Joined
·
578 Posts
Discussion Starter #5
Yes thats correct, Wiring harness needs modding on the resistor pack needs looping..
 
1 - 6 of 6 Posts
Top