GTR Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
885 Posts
Discussion Starter · #1 · (Edited)
Can you cut an intercooler down and then re-weld the tanks back on to make a custom sized FMIC.

Reason why I ask is that I have a spare FMIC sitting here collecting dust and Im considering chopping 2-3 inches off it to make it more compact for another car.

Anyone ever done it,and if so how easy or hard is it to do?

:thumbsup:

PS-Excuse the typos......few glasses of wine and a beer or 3 on me now at this stage.:clap:
 

·
Registered
Joined
·
312 Posts
yeh cut about 10mm from the welds at the core and you will be fine and have something left to weld onto
 

·
Registered
Joined
·
1,537 Posts
Plazmaman rework the GTRs intercoolers using original end tanks, cut and rewelded to new cores, so it has been done before.
 
1 - 5 of 5 Posts
Top