GTR Forum banner

1 - 13 of 13 Posts

·
Premium Member
Joined
·
172 Posts
Discussion Starter #1 (Edited)
Car is in for some work, usual tracking and service and my amayama purchased bellhousing.

Knock knock......


Sent from my Pixel 3 using Tapatalk
 

·
Premium Member
Joined
·
349 Posts
Hopefully, you'll get back a quieter car. I had a bellhousing replaced as it had too much movement in/out, but it hardly made a noise, sometimes never. Now I have a replacement one which has no movement but rattles.......just learning to live with it.
 

·
Registered
Joined
·
2,872 Posts
Hopefully, you'll get back a quieter car. I had a bellhousing replaced as it had too much movement in/out, but it hardly made a noise, sometimes never. Now I have a replacement one which has no movement but rattles.......just learning to live with it.
Thats because half the time the noise is tension plate on the flywheel and that does not come new with any aftermarket bellhousing !!!
 

·
R35 Section manager
Joined
·
10,834 Posts
I hope apart from the bell housing the car is going ok Robin?
Would be good to see an up to date photo when you get a chance mate
 

·
R35 Section manager
Joined
·
10,834 Posts
Just had the MOT reminder come through Robin! You can apply for a 6 month extension on it if you haven't had it done yet.
 
1 - 13 of 13 Posts
Top