GTR Forum banner

1 - 20 of 26 Posts

·
Registered
Joined
·
444 Posts
Discussion Starter #1 (Edited)
Turbos
Not sure if they are N1.... the shafts and turbines are steel. Ran approx 45t kms... one wheel has minor chipping but works perfectly fine, normal axial play didn't touch the housing... £250 for both

Wastegates
Standard ones...working fine.... £25 for both

Turbo elbows
By the looks of them, standard elbows... £100

OEM Manifolds
without heat shields... £120

OEM injectors
Not sure how much I should be asking for these, had them tested works fine...for all six £75

OEM Fuel Rail
comes with OEM FPR.... £70

Timing belt cover RB26
Standard good condition.... £50

Cam Pullys
Standard good condition ......£25 for both

C-West side skirts
Pics mounted can be seen further below.... £250

Top Secret front diffusor
In perfect condition....... looking for £650 or swap with an OEM V-Spec one

TEIN Bonnet dampers
I was dumb enough to get them chromed because back then I thought green didn't fit in.... about a year old.... £75

OEM bonnet
Still mounted on my car... in perfect condition, no dents or scratches...£450


All Prices plus shipping/paypal taxes.

I am willing to negotiate on prices...try me;)


Thread will be updated frequently as soon as I get the rest built out of the car
 

·
Skyline Section Manager
Joined
·
11,878 Posts
Are the turbos BB?

If so, I'll take them.
 

·
Super Moderator
Joined
·
15,883 Posts
Is the diffuser genuine? Pic?
 

·
Registered
Joined
·
444 Posts
Discussion Starter #5
Is the diffuser genuine? Pic?
Yep... genuine stuff! Got it from Matty, he can confirm that for me :)

Here are some pics mounted to my car:








Pics of the side skirts can also be seen here by the way :D
 

·
Skyline Section Manager
Joined
·
11,878 Posts
If the turbos are OE R34 GTR items, they should be ball bearing turbos.

How did the damage occur?
 

·
Registered
Joined
·
444 Posts
Discussion Starter #7 (Edited)
If the turbos are OE R34 GTR items, they should be ball bearing turbos.

How did the damage occur?
Sadly I have no idea. I'm changing to Garrett 2860-5s and saw that the fins on one turbo was slightly chipped... they didn't touch the housing... I checked the axial play, and that was alright. It looks like a small stone or something flew around there... I'll get some pics up ASAP. I checked the rest of the system if anything broke off and flew around in the system... nothing.

here are some pics of them I took this morning...was just comparing sizes with the upgrades. they're the ones on the left in each pic:



 

·
Registered
Joined
·
444 Posts
Discussion Starter #8 (Edited)
Pics of the metal tag by the turbos :) Sry.. this took so long... was abbroad due to work.










Sry for the bad pics:(
I wrote down what was stamped into those plates;
the first turbo: CB1233J 14411-AA300 702987-3
second turbo: CB1291J 14411-AA300 702987-3
Hope this helps.....


Here's a pic of the chipped fins:
 

·
Registered
Joined
·
678 Posts
Hey Joey, when you fit your gtr badge did you have to grind the back of the badge flat or did you mount it the way it came? Love the top secret diffuser by the way I wish I had a spare 650 lying around. Glws
 

·
Registered
Joined
·
444 Posts
Discussion Starter #10
Hey Joey, when you fit your gtr badge did you have to grind the back of the badge flat or did you mount it the way it came? Love the top secret diffuser by the way I wish I had a spare 650 lying around. Glws
Hi Stephen
Yep had to even it out a bit ;) Thx... unfortunately no one is interested :(
 

·
Registered
Joined
·
678 Posts
Well I am interested mate but I have rent to pay this week and I'm currently funding my missus' 6 week holiday in Estonia, if it's still there in a few weeks I might be in a position to buy it :thumbsup:
 

·
Registered
Joined
·
444 Posts
Discussion Starter #12
Well I am interested mate but I have rent to pay this week and I'm currently funding my missus' 6 week holiday in Estonia, if it's still there in a few weeks I might be in a position to buy it :thumbsup:
Sounds good ;) just have a look in here from time to time ;)
 

·
Registered
Joined
·
1,080 Posts
Hi Stephen
Yep had to even it out a bit ;) Thx... unfortunately no one is interested :(

Hi there, very interested in your Top Secret Diffuser. I have an OEM V-Spec one (which is a bit damaged and would need a good refurb). Let me know if you would like to see some pictures if you want a swap plus cash in your direction?? :)
 

·
Registered
Joined
·
444 Posts
Discussion Starter #14
Hi there, very interested in your Top Secret Diffuser. I have an OEM V-Spec one (which is a bit damaged and would need a good refurb). Let me know if you would like to see some pictures if you want a swap plus cash in your direction?? :)
You have PM ;)
 

·
Registered
Joined
·
10 Posts
Super interested in the bonnet damper bit seems the part number for 33 GTR and 34 GTR are different so won't suit for me :(
 

·
Registered
Joined
·
444 Posts
Discussion Starter #16
Super interested in the bonnet damper bit seems the part number for 33 GTR and 34 GTR are different so won't suit for me :(
I have no idea unfortunately :(
 

·
Registered
Joined
·
444 Posts
Discussion Starter #17
Injectors SOLD
 

·
PornStar Member
Joined
·
3,512 Posts
Hi Joey

Do you know if the Front Splitter will fit onto the underneath of an OEM Spoiler ??

If so, let me know when you are desperate to get rid of it :chuckle:

Me
 

·
Registered
Joined
·
444 Posts
Discussion Starter #19
Hi Joey

Do you know if the Front Splitter will fit onto the underneath of an OEM Spoiler ??

If so, let me know when you are desperate to get rid of it :chuckle:

Me

Hiya Robbie,

Yep should fit... I had it on my OEM bumper first too... and it worked perfectly fine :) you've got an OEM Diffusor by any chance?? ;)
 
1 - 20 of 26 Posts
Top