GTR Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
591 Posts
I've always used 1 or 2 mm sheet depending on whether it's purely skins being done rather than slightly more structural stuff
 

·
Registered
Joined
·
591 Posts
Small jobs I buy sheets off eBay - you pay over the odds but it's still only a few quid and a lot more convenient than having to get off my lazy arse and go pick it up from a metal supplier!
 

·
Registered
Joined
·
591 Posts
Mild steel sheet, there's plenty of it on eBay!

Don't get galvanised sheet unless you either want to 1) spend ages grinding it down to bare steel before welding, or 2) welding galv metal and bringing your life expectancy right down by breathing in the fumes :)
 

·
Registered
Joined
·
1,151 Posts
Discussion Starter · #7 ·
Mild steel sheet, there's plenty of it on eBay!

Don't get galvanised sheet unless you either want to 1) spend ages grinding it down to bare steel before welding, or 2) welding galv metal and bringing your life expectancy right down by breathing in the fumes :)



Much appreciated
 
1 - 9 of 9 Posts
Top