GTR Forum banner

1 - 19 of 19 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1 (Edited)
Hello this is my drift car from Spain.
In Spain not sold skyline, so it's very hard to find parts.
I would like to help me and comment on possible improvements.

The changes I have in my car are, remove maf, coils splifire, spark plug hks, turbo r32 rebuild n1, link ecu, 2 apexi air filter, exhaust 3 "
The car has an engine power of 430 hp turbo 1.2 bar

As I am new to the forum will not let me upload pictures, now I have a blown engine ... Three bad pistons and one turbo ... :(
I hope to learn a lot from you.
 

·
Registered
Joined
·
33 Posts
Discussion Starter #4
I have many questions about the engine.
For hp worth the oem injectors.
How much power can be obtained with modified turbos r32 n1
 

·
Registered
Joined
·
5,044 Posts
Stock parts should get you to around the 400 mark... Do a search on here, upgrades are discussed on here plentyfull ;)
 

·
Owner of the MSNSPS
Joined
·
5,199 Posts
When rebuilding the engine, do take another map

How much power support oem 440 injectors.

There are some guide to know where to change for different powers?
Have a search about but here are some pointers:

GT-R Turbos

Injectors bhp = cc - 10%
So 444cc - 10% = 400bhp

This is very approximate.

For you application I'd be looking at the R34N1 turbo or the Garrett -7s.

Assuming that you want good response and don't need more than 500bhp.

Good luck!
 

·
Registered
Joined
·
33 Posts
Discussion Starter #12
Have a search about but here are some pointers:

GT-R Turbos

Injectors bhp = cc - 10%
So 444cc - 10% = 400bhp

This is very approximate.

For you application I'd be looking at the R34N1 turbo or the Garrett -7s.

Assuming that you want good response and don't need more than 500bhp.

Good luck!

Thank you very much!
The Garrett turbo 707160-7? is to 500hp max? hold out the most of your power?
500hp would be fine, but my interest to be reliable. maybe better would be the Garrett 707160-9
 

·
Registered
Joined
·
33 Posts
Discussion Starter #13
This is what I want to ride yet.

CP Pistons / Manley Rods Combo RB26DETT
N1 water pump
SPOOL RB Billet Oil Pump Gears (for OEM Pump)
ACL Race Series Main Bearing Set - Nissan RB26
ACL Race Series Rod Bearing Set - Nissan RB26
RB26 Crank Extended Collar
ARP 202-4207 Head Stud Kit - RB26DETT
Cometic Top End Gasket PRO2017T StreetPro Kit 87mm x .051 "RB26

Injectors?
Turbos?
 

·
Registered
Joined
·
33 Posts
Discussion Starter #14
I already have the car running and shooting done, failing to make electronics.
How many horses can I get? That pressure turbo recommend?



CP Pistons / Manley Rods Combo RB26DETT
N1 water pump
SPOOL RB Billet Oil Pump Gears (for OEM Pump)
ACL Race Series Main Bearing Set - Nissan RB26
ACL Race Series Rod Bearing Set - Nissan RB26
RB26 Crank Extended Collar
ARP 202-4207 Head Stud Kit - RB26DETT
Cometic Top End Gasket Kit 87mm x PRO2017T StreetPro .051 "RB26
Supertech valve guides
Inyectors 800
Turbos garret-5
Fuel pump aeromotive 340
 

·
Registered
Joined
·
33 Posts
Discussion Starter #17
Hello! I'm desperate with my engine ...
I need help.
Where I can get the following items?

Turbos garret Restrictor-5 oil line oem
Block tomei oil restrictor type
Nissan new oil pump, I do not care if normal or n1.
Oem crankshaft bolts or arp
A cometic head gasket or similar

I'm interested that the delivery is fast, it is a race car and I've already lost two round
 

·
Registered
Joined
·
9,736 Posts
I have a spare tomei oil restrictor..

Oil pump, buy one from Nissan Chesapeake USA, they are on Ebay and genuine Nissan.
 

·
Registered
Joined
·
33 Posts
Discussion Starter #19
I have a spare tomei oil restrictor..

Oil pump, buy one from Nissan Chesapeake USA, they are on Ebay and genuine Nissan.
Hello!
I'm from Spain, I used parts are very well priced but the shipping is very slow, once the package has arrived in Spain the customs office they may have retained two weeks.
In total, it may take more than 1 month ...

you sell the restrictor Tomei?
 
1 - 19 of 19 Posts
Top