GTR Forum banner

1 - 1 of 1 Posts

333 Posts
Discussion Starter #1
Last year I removed my engine to replace all intake gaskets and install 2860-5s,
All is back together now a few weeks but I can***8217;t seem to get boost over about .3bar. Engine is idling and revving perfect when stationary.

Engine is pretty much stock inc injectors, ecu and afms.

Things I have done are
Coil pack harness
Changed bov***8217;s
Checked all vacuum lines and even plumbed wastegates directly to solenoid.
Boost Leak test

The actuators on the 2860-5s open at about 1.3bar, would this be the cause of it? Would the stock actuators work one these turbos till I get it tuned?

Any help appreciated. Thanks
1 - 1 of 1 Posts