GTR Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
754 Posts
Discussion Starter · #1 ·
I am looking to book my car in soon to have the following fitted

Tomei 260 in & ex Cams
Up-Rated Turbos (not sure which yet)
660cc Injectors
Steel Head Gasket
Power FC (with a re-map to around 1.2 bar)

While the heads off would it be worth having the head polished and ported at this stage of tune? and to have the porting done i have been quoted £650 + VAT is this about the right sort of price and would it be worth spending that or should i save/spend the money on something else?
 

·
Registered
Joined
·
8,967 Posts
Sounds very reasonable to me. Just be careful who does it and make sure they've done some before and have proven good results...
 

·
Registered
Joined
·
627 Posts
Just be careful who does it and make sure they've done some before and have proven good results...
Peter,couldn't agree more.My head gasket let go on the dyno due to over- porting.
 

·
Registered
Joined
·
213 Posts
Are there special considerations when working an RB head vs. any turbo 4-valve head?
 
1 - 6 of 6 Posts
Top