GTR Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
720 Posts
Discussion Starter · #1 ·
Tomei PonCam typeB 260/260 9.15 lift .vs. HKS step1 272 8.7mm lift (another option is HKS 264/264 8.7mm cams)

i cant find the specific answer searching the forums, which is best for n1 turbos? am i better off with higher duration or lift?

fuel economy, torque, idle, peak [email protected], where they make power etc.

i want a set of cams that fit straight in with not taking the head off or making any other mods.:)
 

·
Registered
Joined
·
720 Posts
Discussion Starter · #2 ·
forgot to add i may upgrade to slightly bigger turbos in the [distant] future like gt-rs.but id rather not waste money changing cams twice if avoidable.

for the moment i would be very happy with 480+ath.
 

·
Registered
Joined
·
242 Posts
going with more lift will provide more torque. having a greater duration is going to deliver more power at the top end of the revs. go the pon cams.
 

·
Registered
Joined
·
2,029 Posts
Defo pon cams.......will suit the N1 tubbies to the ground and still be good for future upgrade.
 
1 - 4 of 4 Posts
Top